STEP 1
Order your starting size
Pick a size and check out. No measurements needed to buy.
✓ 10 Days Easy Returns
✓ Free Shipping Worldwide
✓ Secure Checkout
Built around the practical proportions of classic flight outerwear, this men’s brown leather aviator jacket combines substantial 1.3mm sheepskin leather with genuine off-white shearling and functional cold-weather details. Its vintage brown finish, exposed shearling edges and compact waist-length silhouette give it an authentic aviation-inspired character without making it feel like a costume piece.
The outer shell is crafted from 1.3mm sheepskin leather. This thickness gives the jacket a more substantial structure than lightweight fashion leather while preserving the natural flexibility associated with sheepskin.
A vintage finish creates gentle variations across the brown surface, helping the jacket develop character rather than appearing completely flat or uniform. Natural differences in grain, tone and creasing are expected in genuine leather and make each jacket slightly individual.
Off-white genuine shearling is visibly incorporated around the broad collar, cuffs and lower hem. Its warm natural colour produces a strong contrast against the vintage brown exterior, while the soft texture creates comfortable contact points around the neck and wrists. For more winter-focused designs made with real leather and genuine fur, explore our shearling leather jackets.
The oversized aviator collar is one of the jacket’s defining features. When left open, it frames the face and displays the off-white shearling. For additional coverage around the neck, the collar can be raised and supported using the dual leather straps and metal buckles positioned at the front.
The two perforated leather tabs allow the collar position to be adjusted rather than held by a single fixed fastening. This traditional flight-jacket detail is both visually distinctive and useful when the wind becomes stronger.
The centre front closes with an original YKK metal zipper featuring two sliders. Unlike a standard one-way zipper, this arrangement allows the jacket to be opened from the bottom while the upper section remains closed.
Opening the lower section can reduce pressure around the waist when sitting, driving or travelling. It also gives the wearer more control over ventilation without fully opening the jacket. The exposed metal teeth complement the jacket’s functional aviator styling.
Two vertical zippered pockets are positioned on the lower front. Their streamlined openings sit close to the body and provide a secure place for frequently carried belongings. The vertical angle also makes the pockets easy to reach without introducing bulky exterior flaps.
One additional pocket is placed inside the jacket for smaller personal items. Customers interested in alternative flight silhouettes, colours and collar constructions can compare this design with the wider men’s leather aviator jacket collection.
The jacket uses a relatively clean front construction that allows the vintage leather surface and shearling collar to remain the main visual features. Tone-on-tone stitching follows the shoulder joins, armholes, pocket openings and zipper edges without adding unnecessary contrast.
Across the back, a curved horizontal yoke shapes the shoulder area. A central vertical seam divides the lower back into balanced panels, while additional sleeve seams help form the arms and elbows. Predominantly single-row topstitching is visible along the yoke, shoulders and major panel joins.
The cuffs finish with exposed shearling rather than knitted ribbing or zipper adjustments. Matching off-white shearling also follows the lower edge, creating a defined waist-length hem and completing the traditional aviator profile.
The 1.3mm sheepskin exterior, shearling details, high-closing front and adjustable collar make this jacket suitable for cold-season wear. The short aviator length provides less lower-body coverage than a long coat, but it offers easier movement and works well for driving, walking and everyday use.
For moderate cold, it can be worn over a shirt or light knit. In lower temperatures, allow enough space for a warmer sweater or thermal base layer. Individual comfort will depend on climate, wind, activity level and the layers worn underneath, so a fixed temperature rating would not be accurate for every wearer.
Material: Genuine sheepskin leather
Leather thickness: Approximately 1.3mm
Colour: Vintage brown
Fur type: Genuine off-white shearling
Collar: Wide shearling aviator collar
Collar adjustment: Dual leather straps with metal buckles
Main closure: Original YKK metal zipper
Zipper construction: Two-way closure with double sliders
Exterior pockets: Two vertical zippered pockets
Interior pockets: One inside pocket
Cuffs: Straight cuffs with exposed off-white shearling
Hem: Waist-length hem with exposed shearling edging
Back construction: Curved shoulder yoke with a centre-back panel seam
Stitching: Tone-on-tone panel and edge topstitching
Style: Vintage aviator and flight-jacket inspired
Recommended use: Winter casual wear, travel and everyday cold-weather styling
An aviator jacket should provide enough room through the chest and shoulders for comfortable movement while remaining secure around the waist. It should not pull across the back when the arms are raised or cause the front zipper to bow when closed.
Measure around the fullest part of your chest and compare the result with our jacket size guide. If you plan to wear heavy knitwear beneath the jacket or your measurement falls between two listed sizes, the larger size will generally provide more practical layering room.
Remove surface dust from the leather with a soft, dry cloth. Do not machine wash, soak or tumble dry the jacket. Ordinary household detergents can remove oils from the leather and may affect both the vintage finish and the natural shearling.
If the jacket becomes wet, blot away excess moisture without rubbing and leave it to dry naturally on a broad hanger. Keep it away from radiators, hair dryers and direct sunlight. Once dry, gently lift compressed shearling with a clean, soft brush.
Use conditioners sparingly and only after testing them on a hidden section, since some products can darken a vintage leather finish. Difficult stains should be handled by a professional experienced with genuine leather and shearling garments. Our guide to the best shearling jackets for winter also explains what to consider when comparing construction, warmth and fit.
A two-way zipper lets you open the jacket from the hem while keeping the upper portion closed. This is especially useful when sitting or driving because it reduces bunching and pressure around the waist without exposing the entire front.
The raised collar should provide coverage without pressing tightly against the throat. The adjustable buckle straps allow some control over the closure, but the collar should never feel restrictive or interfere with comfortable breathing and head movement.
No genuine leather aviator jacket should be treated as completely waterproof unless it has been specifically tested and certified as such. The leather may tolerate brief light moisture, but prolonged rain can affect its colour, finish and natural oils.
Begin with gentle dry brushing to remove loose dust. Avoid soaking the shearling or using household stain removers. For oil, dye transfer or deeply embedded dirt, professional leather and shearling cleaning is safer than repeated home treatment.
Normal movement can create creases and subtle tonal changes around the sleeves, shoulders and waist. These changes are part of the ageing process of genuine leather and usually complement the jacket’s vintage appearance.
This is an aviator-inspired leather jacket intended for winter fashion and everyday wear. No protective armour or certified impact protection has been specified, so it should not be presented as specialist motorcycle safety equipment.
Whether you need the perfect fit or a completely custom jacket, we can help.
So we make each jacket for your proportions. Your shoulders, chest, sleeve, and length, in the cut you choose. Not an average.
MADE TO FIT
STEP 1
Pick a size and check out. No measurements needed to buy.
STEP 2
After you order, we’ll send a simple guide to help you take and submit them, plus any customization details.
STEP 3
After finalising the details, The production of your order starts.
For more Help - Contact Us by using our live support or email us at leatherfrontierstore@gmail.com